STORAGE RACK DEPTH 40 CM

120.00990.00 + VAT

  • Easy assembly boltless system
  • Sturdy and practical solution for storage
  • Heavy duty steel construction with white,powdercoated finish for lasting durability
  • The height of each level is easily adjusted
  • Each level supports up to 150kg UDL (Uniformly Distributed Load)
  • For use in: warehouse,factory,office,garage, restaurant,workshop, storeroom, sales room etc
Clear
  • Easy assembly boltless system
  • Sturdy and practical solution for storage
  •  Heavy duty steel construction with white,powdercoated finish for lasting durability
  • Each shelf supports up to 150kg,when evenly distributed
  • Maximum load per unit: up to 750 kg,when the weight is evenly distributed
  • Starter unit: Length 120cm - Add on unit: Length 115cm -
  • The height of each level is easily adjusted
  • Shelves can be adjusted every 6cm
  • Pre-assembled upright frame.Welded diagonal and horizontal bracing on frames for stability and rigidity
  • A level is two beams/bars and 1 shelf (109cm)
  • For use in: warehouse,factory,office,garage,restaurant,workshop, storeroom, sales room etc

                          starter unit                                      ADD-ON UNIT

Dimensions N/A
Length x Depth x Height

120 x 40 x 230 cm, 235 x 40 x 230 cm, 350 x 40 x 230 cm, 465 x 40 x 230 cm, 580 x 40 x 230 cm, 695 x 40 x 230 cm, 810 x 40 x 230 cm, 925 x 40 x 230 cm, 1040 x 40 x 230 cm

Shelf Levels

Two Shelves, Three Shelves, Four Shelves, Five Shelves, Six Shelves, Seven Shelves

Assembly Instructions

LOAD CAPACITY

 

 

SPECIFICATIONS

  1. Height 230cm → Assemble top level at 225cm to increase overall height of your load
  2. Depth 40cm → Your unit depth is determinated by what you need to put on your levels
  3. Length 120cm (Standalone units) → Each add on units increase total length 115cm  
  4. Shelf levels Minimum 2 / Maximum 7 → Choose your desire shelf levels according height of loads in each level
  5. Lower level 8cm to floor →You can assemble lower level higher and have heavier loads on floor  
  6. Pre-assembled upright frame. Welded diagonal and horizontal bracing on frames for stability and rigidity
  7. Upright frame (mm):30 X 50 X 1.0mm, Butterfly Hole
  8. Beam 30 X 50 X 1.0mm → 3 end clip tabs
  9. Metal Shelf 0,4mm → With 4 thick W-shaped steel Stiffeners
  10. Foot plate 2,5mm with dynabolt holes ∅12mm  → Upright frame can be anchored to the floor. Anchor bolts not included